Product
57 Series Coalescing Stainless Filters
Product Details
Our Stainless Steel housings are constructed entirely of 316L stainless steel and are free of welds to comply with NACE MR-01-75. All housings come with Viton Seals and a Coalescing Filter Element.
Our C grade element is constructed of two layers of borosilicate microfiber. The first (inner layer) is comprised of very fine fiber and is more densely packed to capture microscopic aerosols. The outer layer is made up of slightly larger fibers which allow the captured liquids to pass through the depth of the wall and drain off the filter element.
Coalescing elements should always flow from the inside to the outside of the element so that proper draining of liquids can occur. These elements will simultaneously collect particulates.
Product Features
Our CS Grade elements are designed for high temperature coalescing applications good to 900°F. Excellent for heavy coalescing. These elements mimic the C grade, only with a silica binder rather than a PVDF one.
The Flow Rates are based upon our 70CS grade disposable coalescing elements in SCFM @ 100 PSIG with an initial 2 PSID. The 70CS elements are rated at 95% removal against 0.01 microns.
Stainless Steel Filters
Filters are meant to capture dirt, dust, and grime, but there comes a time when you need to replace them. When old filters get too bogged down with contaminants, they can reduce your systems’ overall functionality. However, changing your stainless steel filters can prevent these damages and complications from occurring.
Replace your old filter with one of our high-quality stainless steel industrial filters. At Chase Filters and Components, we have filtration elements to fit your every need.
Stainless Steel Air Filter Functions
Our C-grade element consists of two borosilicate microfiber layers that work together to sift through aerosols and liquids. The inner layers densely packed fine fibers trap aerosols while the outer layer allows liquids to pass through the filter wall and drain into the element.
All stainless steel housings come with Viton® seals for chemical resistance and a coalescing filter element to start the separation of gas and water aerosols and droplets.
Features of Stainless Steel Industrial Water Filters
All of our 57 stainless steel filters feature CS-grade elements designed to endure high temperatures of up to 900 degrees Fahrenheit and promote heavy coalescing. Our filters come equipped with a silica binder rather than the standard C-grade Polyvinylidene fluoride (PVDF) binder, making them more effective in high-temperature environments due to their high surface area and reactivity.
With a 95% micron removal rate, our stainless steel air filters exhibit high efficiency against 0.01 microns.
Purchase Stainless Steel Filters at Chase Filters and Components
If you have further questions about our stainless steel filters, fill out a contact form to get in touch with us.